Regeneron Phase 1
Work commenced on this 6200rn2 project in August 2014 with the peak man-power occurring in the first quarter of 2015. Asgard’s scope will be at practical completion stage in August 2015 with a small amount of work scheduled after this time, namely removing panels to enable the moving in of client equipment and the subsequent reinstallation of these walls. The AES panel system was specified by the client and used on this project.
Ceilings – 5720m2 of AES system walk-on ceilings and bulkheads. Factory formed opes for lights and grilles. 450m2 non-walk-on ceiling panels.
Partitions – AES fully flush panelling system, 50mm thick to cleanrooms including 760Nr fully flush windows, low-level return walls and cold weld joints. Fire rated plasterboard walls to electrical rooms.
Doorsets – Provision of 185Nr swing doors, 3Nr rapid roll doors, 17Nr pass-through hatches.
Lighting – Supply and install 1065Nr LED light fittings including 250Nr emergency battery back-ups and 6Nr EEX rated fittings
HVAC – Supply and installation of 578Nr HEPA filter housings, filter media and grilles.
Interlocking – Design, supply installation and commissioning of interlocking systems.
Other items – Mock-up, 100Nr exit signs, 1280m of guardrails, 36Nr ladders and gates, 22Nr 316 grade s/s fire extinguisher cabinets.
- Project Name: Regeneron Phase 1
- Project Size: 6200m2
- Project Value: €9million
- Project Duration: August 2014 – September 2015
- Client: Regeneron Pharmaceuticals
- Architect: Jacobs Engineering
- Engineer: PM Group
- Main Contractor: PM Group (Managing Contractor)
AES System, l.5kN Ceilings, Walls
Doors, Interlocking & automation
Pass-thru hatches, HEPA filters & housings
Wall mounted bumprail
LED walk-on lights, Guardrails & ladders
Design completed using: